About the N endorsement
You need the tank vehicle (N) endorsement to haul liquids or gases in tanks with an individual capacity of more than 119 gallons and a total capacity of 1,000 gallons or more. The test usually has 20 questions and requires 80%. To haul hazardous materials in a tank you also need the hazmat endorsement; many states combine the two as the X endorsement.
What the test covers
- Liquid surge, baffles, bulkheads and smooth bore tanks.
- Outage and how much to load.
- High center of gravity, curves and rollovers.
- Braking, skids and stopping distance.
- Inspecting valves, manhole covers, vents, hoses and special equipment.
All 22 questions and answers
Take the test first, then open the list to review every question with its answer.
Show all 22 questions and answers
- You need a tank vehicle (N) endorsement to haul liquid or gas in tanks with an individual capacity of more than 119 gallons and a total capacity of:Answer: 1,000 gallons or moreThe N endorsement is required when a tank has an individual rated capacity over 119 gallons and the tanks total 1,000 gallons or more, whether permanently or temporarily attached.
- What is liquid surge?Answer: Movement of the liquid in a partially filled tankLiquid in a partly filled tank moves back and forth. The wave can push the truck in the direction it is moving and make the vehicle harder to handle.
- When you stop a partly loaded tanker on a slippery road, liquid surge can:Answer: Push a stopped truck out into an intersectionAfter you stop, the liquid surges forward and can shove the truck ahead. Brake early and smoothly.
- Baffles inside a tank help control:Answer: Forward-and-back liquid surgeBaffles are bulkheads with holes that slow the front-to-back flow. They do not stop side-to-side surge.
- Even in a baffled tank, side-to-side surge can:Answer: Cause a rolloverBaffles only slow front-to-back movement. Side-to-side surge in a curve can push the vehicle over.
- What is true about smooth bore (unbaffled) tanks?Answer: Nothing inside slows the liquid, so front-to-back surge is very strongSmooth bore tanks are often used for food products such as milk, because sanitation rules make baffles hard to clean. Be extremely careful when starting and stopping.
- When loading or unloading a tank divided by bulkheads, you must watch:Answer: How the weight is distributed front to rearBulkheads divide the tank into smaller tanks. Do not put too much weight on the front or rear of the vehicle.
- What is "outage" in a tank?Answer: Room left in the tank for the liquid to expandLiquids expand as they warm, so you must leave room for expansion. Different liquids expand by different amounts.
- Why might you only partly fill a tank with a very dense liquid?Answer: A full tank could exceed legal weight limitsSome dense liquids, such as certain acids, are so heavy that a full tank would be over legal weight limits. How much you load depends on expansion, weight and legal limits.
- Why are tank vehicles easy to roll over?Answer: They have a high center of gravityMuch of the load is carried high off the road, making tankers top-heavy. Liquid tankers are especially easy to roll over.
- Tests have shown that tankers can turn over at:Answer: The speed limits posted for curvesTake curves, on-ramps and off-ramps well below the posted speed.
- The safest way to take a curve in a tanker is to:Answer: Slow down before the curve, then accelerate slightly through itBraking in a curve can cause a skid or rollover. Slow down before you enter the curve.
- When coming to a stop in a tanker, you should:Answer: Keep steady pressure on the brakes and not release them too soonBrake early and smoothly, keep steady pressure, and do not release too soon, or the surge can push you forward.
- Compared with a full tanker, an empty tanker:Answer: May take longer to stopEmpty tank vehicles may take longer to stop than full ones because they have less traction. Wet roads also roughly double stopping distance.
- To avoid skids in a tank vehicle, do not:Answer: Oversteer, over-accelerate or over-brakeSkids happen when you steer, accelerate or brake too hard. Drive smoothly, especially with a partly filled tank.
- If you must stop quickly in a tanker without antilock brakes, you should use:Answer: Controlled or stab brakingLocked wheels cause skids. Brake firmly without locking the wheels, or use stab braking, and expect the liquid to surge.
- Before loading, unloading or moving a tank vehicle, the intake, discharge and cut-off valves must be:Answer: In the correct positionCheck every valve and make sure it is in the right position before you load, unload or move the vehicle.
- When inspecting a tank, you should make sure the manhole covers:Answer: Have gaskets and close correctly, and that the vents are clearManhole covers must seal properly and vents must be clear so they work right. Never drive with open valves or manhole covers.
- Where should you look for leaks when inspecting a tank vehicle?Answer: The tank shell, pipes, connections and hoses, especially at the jointsCheck the shell for dents or leaks, and check pipes, connections and hoses, especially the joints.
- Special equipment to check on a tank vehicle includes:Answer: Vapor recovery kits, grounding and bonding cables, emergency shut-off systems and built-in fire extinguishersIf the vehicle has special purpose equipment, make sure it works before you drive.
- To haul hazardous materials in a cargo tank, you generally need:Answer: Both the tank and hazmat endorsements (often combined as X)A tanker carrying hazardous materials requires both the N and H endorsements, which many states combine as the X endorsement.
- Which load usually creates the strongest surge?Answer: A partially filled tankA partly filled tank gives the liquid room to build momentum. Be most careful when starting, stopping and turning with a partial load.
Frequently asked questions
What is the X endorsement?
X is the combined tank vehicle and hazardous materials endorsement. You get it by passing both the tank and hazmat knowledge tests and the TSA security threat assessment required for hazmat.